PEN-TYPE SYRINGE PUMP

Takasago Fluidic Systems

【Adopted on an experiment facility on the ISS】

●High resolution provides smooth flow (theoretical resolution: 10.5 nL at full step).
●Remarkably small outer dimensions of Dia. 12 x L 163 mm (except needle, cover), now with a built-in 2-phase stepper motor with a reduction gear. Suitable for portable devices.
●An ultra-small type with an outer diameter of 8.8 mm is also available by custom order. (Please contact us for details of the micro-stepper drive mode.)
●Various syringe terminations: needle, Luer Lock, M6 or 1/4-28UNF threads, disposable tip adaptor, attachment for our ultra-small 3-way valve, etc.
●Has a built-in sensor to prevent overrun.
●An easy-to-use controller is available upon request.
●SXPC series controller is also available, which allows for easy operation. Please contact us for details.
●When using the SXPC controller, a connector is required.

Specification: ●Model Number：
・SBP-100G-N
・SBP-100G-LL
・SBP-100G-M6(1/4U)F
・SBP-100G-DT
●Outer Dimensions：
・SBP-100G-N
　－12 x 14.5 x 215 mm
・SBP-100G-LL
　－12 x 14.5 x 222 mm
・SBP-100G-M6(1/4U)F
　－12 x 14.5 x 163 mm
・SBP-100G-DT
　－12 x 14.5 x 183 mm
●Syringe Capacity
　－100 μl
●Theoretical Resolution：
　－At full step: 10.5 nl
●Wetted Materials：
・SBP-100G-N
　－Glass (barrel)
　－PTFE (tip, seal)
　－Stainless steel (needle)
・SBP-100G-LL
　－Glass (barrel)
　－PTFE (tip, seal)
　－PVDF, Stainless steel(attached needle)
・SBP-100G-M6(1/4U)F
　－Glass (barrel)
　－PTFE (tip, seal)
　－PEEK (port)
・SBP-100G-DT
　－PP (pipette tip) *3
　－Glass (barrel)
　－PTFE (tip, seal)
●Syringe Termination：
・SBP-100G-N
　－Needle 22G
(I.D. 0.40 x O.D. 0.72 x L51 mm)
・SBP-100G-LL
　－Luer Lock
(with needle)
・SBP-100G-M6(1/4U)F
　－M6 or 1/4-28UNF
　　female threads *1
・SBP-100G-DT
　－Adapter for disposable tip
(Eppendorf®, epT.I.P.S., 2-200 μl) *2

*1 Male threads also available.
*2 Disposable tip not included with this product.
*3 Please use the fluid in such a way that, it comes in contact only with the pipette tip.